Connect your TV’s digital audio output to improve your TV’s sound quality and to share your speakers with your premium audio system.
External IR Sensor included to use the MBX-AMP with your current remote control for Volume/Mute commands• Builtin AirPlay streaming with full metadata to iOS/Android apps or XTSPlus touchscreens
Built-in Chromecast for Audio support with full metadata to iOS/Android apps or XTSPlus touchscreens
Hi-Res audio streaming support up to 24-bit/192 kHz
USB for Flash or external USB Hard drive-based music collections
Digital (PCM) and Analog Stereo Inputs
Digital or analog output
Controllable with the MyRussound App and fully compatible with the Russound XTSPlus in-wall touchscreen
Bass, Treble, and Loudness settings available through the MyRussound Ap
Supports local favorites
Onboard browser-based configuration, accessible from a smartphone or tablet
Mix and match with other MBX-Series® components for versatile system designs
We are proud to represent Russound audio products in Pakistan.
Email: [email protected]
The world’s most advanced professional amplifier comes from ASCENDO GERMANY. The D.N.A.1000.2 sets its marks as centerpiece in every passive cinema setup. It impresses with its extensive flexibility as power amp in stereo, dual-mono/bi-amping and single-mono mode – with an authentic spatial image, highest musicality, enormous dynamics and extremely efficient performance.
Output Power = 2 x 500W (4Ω), 2 x 250W (8Ω), 1 x 1050W (4Ω), 1 x 900W (8Ω)
We are proud to have the best German audio products in Pakistan.
Email: [email protected]
Neets Audio Amplifier – 2:25 is a network controlled stereo audio amplifier controlled through LAN or RS-232. The Audio Amplifier – 2:25 adds additional RS-232 and I/O ports for expansion and integrates with Neets and 3rd party control systems.
The USB audio input enables direct audio input and volume control from a computer (PC or Mac).
- Class D amplifier with built-in DSP
High efficiency amplifier with high quality sound
- 2-channel stereo amplifier
2×25 Watts @8 ohm or 2×35 Watts @4 ohm both in stereo
- Bridge mode
1×34 Watts @8 ohm or 1×56 Watts @4 ohm both in bridge mode
- USB audio
Provides audio playback and volume control on connected PC or Mac
- 1 LAN port
Enables control of the amplifier and adds two extra RS-232 ports for expansion of the control system
- 2 Bi-directional RS-232 ports
Used for control or expanding the AV system with more devices
- 4 General Purpose I/O ports
Used for extra input/output ports for control of relays, switches and sensors.
- Auto power function
Powers on when signal is detected, and enter sleep-mode automatically after 15 minutes without signal
- Input 1 Mix function
Possible to set Input 1 as an input, that mixes with the current selected input.
- 3 band equalizer
Works as an active filter for bass, mid and treble
- LED indicators on the front
Convenient located on the front for easy performance indication
- Easy mounting
Can be mounted in trunking systems, hidden or in 1RU using the Neets Rack Shelf
Configuration is done directly using a built-in configuration area that fully integrates with Neets Project Designer
A Small Box That Thinks It Is A Big one – Floor-Standing Monitor C6
The beautifully elegant C6 captivates with its holographic imaging. Fitted with ASCENDO´s point source driver the C6´s three-dimensional imaging is absolutely unique in its category. In spite of its reduced size it succeeds in surprising music lovers because of its profound low level reproduction.
The C6 with its incredibly musical reproduction is a high-quality piece of furniture in classic Bauhaus design. It performs well even when placed very close to a wall, and will definitely cast a spell over you.
Principle = Two-way bass-reflex
20 / 84 / 21 cm
20 / 90 / 21 cm (with base)
Weight = 17 kg
Frequency response = 44 Hz – 25.000 Hz (-3 dB)
Peak power handling = 80 Watts
Nominal impedance = 6 Ohms
Sensitivity = 88 dB / 1 W/m
Chassis = shielded Coax 25 mm Neodymium soft dome tweeter
18 cm woofer with XP membrane
Adaptation to positioning = switchable free-field (F)position
close to wall (W) position
Finish = switchable piano lacquer white / black differing colours in piano
lacquer on request
We are proud to have the best speaker systems in Pakistan.
Email: [email protected]
The most-advanced High End amplifier worldwide!
An integral part of our ACTIVE systems – but just as superb as High-end power amplifier for high-quality passive speakers
The superior sound characteristics of our DNA 1000.2 HE are hallmarked by the highest degree of musicality and extraordinary dynamics, resolution and authority, combined with an authentic spatial imaging. Each listening session is turned into an emotional experience. As a result you are physically present at events as if live. The comprehensive and immediately perceivable optimisation of the entire system of loudspeaker / room is achieved by adjustable input and output channels. Existing problems of room acoustics are solved in a highly efficient way, thus guaranteeing the finest hearing experience under any conditions.
Your system is perfectly adjusted to:
- individual sound preferences
- listening levels
- musical styles
- loudspeaker characteristics
- room acoustics on site
The time response of the loudspeaker is significantly optimised. (with assumed mono operation of the DNA 1000.2 HE and bi-/tri-wiring terminal on the speaker‘s part) All sounds arrive at the listener‘s at the same time. Here applies the the simple rule: the more authentic the reproduction of music, the closer you are at the live event.
Ahead of its time
Audio signals can be streamed to the DNA 1000.2 HE absolutely synchronously and at high resolution via the AVB network.
The DNA 1000.2 HE can convert any input signals into an ABB stream, and transfer them lossless with up to 8 channels via the AVB network by means of CAT cables to any number of DNA 1000.2 HE amplifiers or ASCENDO‘s active loudspeakers and subwoofers. Cable length is no issue any more.
Three modes of operation are possible with the DNA 1000.2 HE:
- Stereo: 2 x 500 Watts sinus
- Double mono: 500 W + 500 W sinus
- Mono: 1000W sinus
Its four detachable magnetic device bases enable the DNS1000.2 HE to be positioned in any direction.
- Very simple self-explanatory central operation of all amplifiers via web browser.
(Amplifiers in mono mode only)
- L/B/H: 360/155*/255* mm
*depending on the orientation +15 mm for the feet
- Weight: 16,3 kg