TOUCH PANEL IP 5 ″ & 8 ″ by Eelectron

The IP touch panels of the Horizone series, based on Android, have a 5 “or 8” color display, in which third-party applications can be installed for the integration of different systems.

VS05H10WEB – VS05H20WEB – VS08H10WEB – VS08H20WEB

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Beacon by Eelectron

Allows recognition of the presence of a user in an environment in place or in the absence of mobile devices.
Performance and reduced consumption, average duration of 5 years or more.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

2-channel light and presence sensor by Eelectron

It is a PIR sensor for recessed ceiling mounting. The load is activated automatically when motion is detected and the ambient brightness is below the set Lux value. Not detecting any movement and after waiting for the pre-set delay time, the load will be turned off automatically.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

IO41 module by Eelectron

2 digital INPUTS (4 IN + 1 OUT) 230Vac power supply that can be configured as: 2 single channels directly connected to two lights / loads (e.g. On-Off control, excluding light dimming) or as 1 coupled channel to drive 1 remote shutter / load using a 2-way switch. Can be used to control from smartphone. This is the best smart home automation product for customers.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

DALI module by Eelectron

The brightness of the DALI lamps is controlled by the brightness sensor BT01A01OTO SENSOR connected to the IO42A01BLE device or by the brightness sensor on the Jackie IoT lamp. Smart home automation via smartphone from Eelectron Otomo. This device has 2 channels x 8 ECG Broadcast Integrated circadian cycle – 230Vac power supply

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

TRANSPONDER READER KNX

The Transponder Reader TR32Ax9KNX is 2 IN / 2 OUT + BELL and a KNX wall mounting device suitable to access control application.
This device can be used in any kind of building (Hotel, Hospital, Offices, Parking, etc..) where the access control application is required.
The device is equipped with two binary inputs (potential free contacts) that can be used, for instance, to control whether the door lock has been opened or closed or other signals coming from external switches/contacts (i.e. windows, bathroom emergency alarms, etc..) and with one frontal switch freely configurable by ETS. The transponder reader is equipped also with two output relays which can be used for any purposes, typically to open the door or turning on the courtesy light inside the room.
The product provides on the front side four LEDs in order to enlighten 4 icons to display the following states (e.g. in case of Hotel management):
– Access Allowed/Not Allowed
– SOS request
– Service Call (clean room, etc..)
– Client status (“Busy room” or “Do not Disturb”)
The LEDs and icons can be configured in association with other alarms or events. The transponder reader can reads cards or keys at a maximum distance of 30mm from the front side.
The access control follows a sequence where the “build number” has been checked at first, then the “data” to check if it has been elapsed or not, next the password ID for client/ guest/service identification, then the enabled entrance timing window. In case card reading pass all checks the door is opened and, if set, the courtesy light inside is switched on. At the same time the Transponder Holder can send the reading response to the bus.
The device configuration for commissioning in terms of physical address, group addresses and parameters is done with ETS ( Engineering Tool Software) through a download of the Application Program.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

TRANSPONDER KEYHOLDER

Dimensions and characteristics of Key chains
Dimensions and Material: ABS 38 x 34 x 6 mm
Frequency: 125KHz –
Operational temperature: -10 ° C to 50 ° C
50 PCS

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

EMBEDDED PC WITH ESUITE

Software for managing hotels, for supervising KNX environments and for the control of accesses and alarms. Interfaces with management and other software. Remote management via own Internet or Ethernet. The package is available also with IP, USB, IP Router Interface.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

VIRTUAL BADGE – HORIZONE WEBSERVER by Eelectron

Virtual Badge is an innovative access control system, which allows the opening of door locks with your smartphone, without the need for keys or badge readers physically installed in front of each door.
The management of permission of the users, and the sending of virtual access keys, is entirely manageable via app, both locally and remotely, and is therefore ideal also for unattended structures.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

WEATHER STATION PLUS KNX

Measurement and evaluation of weather data: Wind speed, Wind direction, Precipitation, Brightness, Global radiation Twilight, Temperature, Relative air humidity and Air pressure
– Installation on the outside of buildings, preferable in the roof and facade area
– Operation with additional power supply Product characteristics
– Integrated GPS/GLONASS receiver for automated positioning
– Calculation of additional weather data: Absolute air humidity, chill temperature, comfort
– Function for shading control
– Integrated KNX bus coupling unit
– Measurement data acquisition and limit value monitoring
– Software logic modules for linking events
– Integrated heating

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]