Smart Home Automation – Lighting Control System – Home Cinema
KNX Smart Home Systems, Building Automation, Audio Video Controls & Home Theater Systems
Help yourself with Beacon to monitor the presence of people in your office, and thus ensure air quality and social distancing.
For queries please contact below
Tel: +92-21-35250460
Cell: +92-313-8867581
Cell: +92-331-2887178
Email: [email protected]
Power supply 230Vac – 77W 5521lm/100W 7361lm
Giano IoT is a Bluetooth-driven direct and indirect suspension lamp with embedded on/off control.
Automatic On with OTOMO users presence detection
Jackie IoT is a Bluetooth® driven LED table & floor lamp with embedded brightness and temperature sensor
Power supply 230Vac – 10W 526lm
Automatic On with OTOMO users presence detection; On/Off and dimmer by OTOMO APP.
Embedded brightness sensor do not drives LED Jackie_IOT lamp itself.
IN00A01BLE is a built-in KNX device that acts as a two-way gateway between the KNX bus and the OTOMO Bluetooth® mesh; it includes 2 analog inputs for the connection of a BT01A01OTO temperature and brightness probe and a 10A – 230V relay with dry contacts. The two-way communication between the two systems allows to introduce in KNX installations the advantages of the typical functions of an OTOMO system such as the presence detection – via Mobile App and Beacon – of a user in an environment or the opportunity to transfer information, commands, states between one system and the other. The product includes a thermostat module capable of managing 2 stages with integrated PI controller for the control of heating and cooling equipment, valves, 2 and 4-pipe fan coils, etc.
The device is a ceiling flush mount PIR detector. The load will be switched on automatically when the movement is detected and the ambient light level is below the Lux setting value. Until there is no movement detected and the pre-set delay time has been expired, load will be switched off automatically. User can pre-set the desired Lux and Time values by VR or IR setting for automatic control lighting on / off with low initial cost and great energy saving potential.
New Miniswitches KNX suitable with plates of Eelecta’s range 2 or 4 modules or Glass Frames in 3 or 4 modules. The range is composed by 3 models that include 1, 2 or 4 channels switches with a dimension of 45×45 mm (frame not included). For each channel are available 2 signaling led’s (white/blue). The switches are available in 2 different colours (white or anthracite) and the plates in 3 colours (white, silver e black).
Eelecta Homepad pushbutton range of KNX devices is divided in 5 different models based on the number of switch, input and temperature sensors provided with the device.
Scheme Eelecta switches range:
PB40AxxCON – 4 CHANNELS CONVENTIONAL
PB40BxxKNX – 4 CHANNELS KNX
PB40CxxKNX – 4 CHANNELS KNX + 4 INPUTS + TEMPERATURE SENSOR
PB80AxxKNX – 8 CHANNELS KNX + TEMPERATURE SENSOR
PB80CxxKNX – 8 CHANNELS KNX + TEMPERATURE SENSOR + CIRCULAR FUNCTIONS
Product has 4 (8) push buttons which can be configured to manage lights, dimmers, shutters, etc. ; and 4 inputs (where present) on the backside to interface free potential contacts (for example sensors, traditional buttons, etc.).
The KNX® 9025 switch range consists of 2 – 4 – 6 – 8 – 10 channels capacitive buttons. Each button can be configured to manage on/off commands, dimming, shutters and venetians control, scene recall and control, objects sequences etc. ; Device includes a 2 stage Room Temperature Controller with integrated PI to control heating and cooling equipment, valves, 2 and 4 pipes fan coils; etc.. Device has an embedded temperature sensor and a rear 2 poles connector configurable as digital or analog input; It’s possible to connect an additional NTC temperature probe (Eelectron codes TS01A01ACC or TS01B01ACC – not included) to perform a direct temperature measurement.
9025 range has a RGB led bar on the front side in order to visualize feedbacks or other values available over the KNX bus (function available on the RGB range).Devices are available in 2 ranges: STANDARD and RGB; each range may have glasses in CUSTOM version. Using glasses in CUSTOM version is possible to light up custom and interchangeable icons matching with the associated function. The 9025 KNX® range is mounted in 2 module box and is compliant with main standards (British, German, Italian, etc).Device is equipped with KNX communication interface.
HORIZONE MINI is a webserver specifically engineered for supervision and monitoring of Home & Building Automation systems. Based on KNX standard and suitable for integration with Modbus standard. Compatible with operating system Mac OS X, Microsoft Windows, Apple iOS and Google Android, the configuration and use of HORIZONE MINI takes place directly through its web interface, which can be accessed through a the most popular browser on the market browser from any device (pc/mac, smartphone e tablet) or with free app available on iOS and Android store.
Mona Series offers all the solutions you need in hotel operations in the same concept. Mona continue to add value to your space with frameless design. A unique user experience with its touch design and minimalist icons. All the solutions you need are just a touch away.
We are proud to have the best audio visual system in Pakistan.
Tel: +92-21-35250460
Cell: +92-331-2887178
Cell: +92-330-6322277
Email: [email protected]