UNIVERSAL LIGHTING CONTROL RELAY 4IO

Device IO04F01KNX is a DIN rail EIB / KNX actuators with 4 relay outputs that canbe configured as:

–  4 outputs for light / load control
–  4 channels for valve in PWM (solenoid actuators)
–  2 channels for roller shutter / venetian control
–  2 channels for 3-point valve control
–  1 fan coil actuators 2-pipes

The device also includes 4 inputs that can be connected to pushbuttons, switches, or be configured as outputs to activate individual signalling LEDs (eelectron code LD00A01ACC / LD00A11ACC) and can be used for on / off, dimming, shutters or venetian blinds / scenarios, sequences, step-by-step commands, etc. 4 inputs (of the 16) are configurable as analogue for the connection of NTC temperature probes (see probes eelectron code TS00A01ACC / TS00B01ACC) with which to send 4 temperature measurements on the bus and manage a simple on / off controls (e.g. thermo furniture).
It is also possible to enable 4 complete thermostat modules; each thermostat module manages 2 stages with integrated PI controller for driving heating and cooling equipment, valves, 2 and 4-pipe fan coils, etc.

Version IO04F01KNX-SD includes a microSD card reader includes a microSD card with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

DIN VALVES / LOADS ACTUATOR 8 INPUTS / 4+4 OUTPUTS

The HA88B01KNX device is a DIN rail EIB / KNX actuator with 4 Triac outputs at 24… 230V AC for the control of thermoelectric valves and with 4 relays of 16A-230VAC; the devices also include 8 inputs for dry contacts (potential-free). The 4 Triac outputs can be configured as:
• 4 channels for valve control in ON / OFF or PWM
• 2 channels for 3-points valve control
The 4 Relay outputs can be configured as:
• 4 outputs for light / load control
• 4 channels for valve in PWM (solenoid actuators)
• 2 channels for roller shutter / venetian control
• 2 channels for 3-point valve control
• Groups of 2,3,4 relays for special function using logic interlock.

The device is suitable for the management of 2/4 pipes fan coils up to 3 speeds; the outputs not used by the application can be used to control other equipments. Inputs can be connected to buttons or switches (potential-free) and can be used for on / off commands, dimming, shutters or blinds / scenarios, sequences, step commands, etc. Inputs from 1 to 4 can be configured as outputs to activate single signaling LEDs (see eelectron leds code LD00A01ACC / LD00A11ACC) or can be configured as analogue inputs for the connection of NTC temperature probes (see eelectron probes code TS00A01ACC / TS00B01ACC ) with which to send 4 temperature measurements on the bus or to manage 4 complete thermostat modules.

Each thermostat module manages 2 stages with an integrated PI controller for controlling heating and cooling equipment, valves, 2 and 4 pipe fan coils, etc. Additional 3 thermostat modules are available in the device for a total of 4. Moreover, 7 logic blocks are available to implement simple expressions with logical or threshold operator or complex expressions with algebraic and conditional operators; It is possible to use predefined algorithms as proportional controls of temperature and humidity or dew point calculation.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

UNIVERSAL FANCOIL CONTROLLER 0-10 by Eelectron

The TC57A01KNX device is a DIN rail EIB / KNX actuator for fan coil units control. The device has 3 0-10 V outputs and 3×16 A relays. Two 0-10 V outputs are dedicated to the management of proportional valves, variable speed management be done with the third 0-10 V output or with the 3 relays on board. If relays are not used for speeds, they can activate lights or other loads. An input is also available for reading 0-10V or 4-20mA signals to interface external probes for temperature, humidity, CO2, etc; the third 0-10 V output can also be configured in this mode, as input. There are also 5 digital inputs for dry contacts in order to connect buttons, window contacts, alarms; 2 inputs can be connected to NTC temperature probes (eelectron codes TS00A01ACC and TS00B01ACC). The logic inside the device can manage a 2/4 pipes fan coil with an internal 2-stage PI algorithm. A sophisticated parameterization allows its use in modern systems that require a differentiation of the behavior between speed and valves (independent regulation differentials), ventilation to avoid air stratification, logics for efficient maintenance of comfort and energy saving.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

24 Channel KNX Lighting Control Relay

Device BO24F01KNX is a DIN rail EIB / KNX actuators with 24 relay outputs also termed as 24 channel relay that can be configured as:

–  24 outputs for light / load control
– 24 channels for valve in PWM (solenoid actuators)
–  12 channels for roller shutter / venetian control
–  12 channels for 3-point valve control
–  6 fan coil actuators 2-pipes / 4 fan coil actuators 4-pipes
It is also possible to combine 3,4 or 5 relays with logic interlock for 4-pipe / 3-speed fan coil control or combine groups of relays (up to 8) for special function using logic interlock .

Version BO24F01KNX-SD  includes a microSD card reader with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.

We are proud to have the best smart home automation range in Pakistan.

Cell: +92-331-2887178

Cell: +92-330-6322277

Tel: +92-21-35250460

Email: [email protected]

20 Channel Lighting Control Relay by EAE

EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs.

General Specifications


Does not require an external power supply, 20x16A Outputs

Room Control Unit covers all requirements of control in room applications and offers following functions:

  • Light switch
  • AC/DC blind control
  • Fan control
  • Fan Coil Control (2 & 3 point valve)
  • Dry contact inputs

Switching resistive, capacitive and inductive loads in accordance with EN 60669 with following functions:

  • Staircase
  • External logic
  • Priority
  • Threshold
  • Operating hour
  • Sweep

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

16 Channel KNX lighting control relay

EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs.

General Specifications


Does not require an external power supply, 16x16A Outputs

Room Control Unit covers all requirements of control in room applications and offers following functions:

  • Light switch
  • AC/DC blind control
  • Fan control
  • Fan Coil Control (2 & 3 point valve)
  • Dry contact inputs

Switching resistive, capacitive and inductive loads in accordance with EN 60669 with following functions:

  • Staircase
  • External logic
  • Priority
  • Threshold
  • Operating hour
  • Sweep

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

RCU1200 12 Channel KNX Relay

EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs.

General Specifications


Does not require an external power supply, 12x16A Outputs

Room Control Unit offers following functions:

  • Light switch
  • AC/DC blind control
  • Fan control
  • Fan Coil Control (2 & 3 point valve)
  • Dry contact inputs

Switching resistive, capacitive and inductive loads in accordance with EN 60669 with following functions:

  • Staircase
  • External logic
  • Priority
  • Threshold
  • Operating hour
  • Sweep

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

SW104 – 4 Channel KNX Relay

4x16A, 500A Inrush Current

In addition to switching resistive loads, SW108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers for smart home automation

General Specification


4 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

  • Stair function
  • External logic
  • Internal logic
  • Priority function
  • Threshold function
  • Transaction time
  • Sweep function

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

16 Channel KNX Relay by Eelectron

Device  BO16F01KNX is a DIN rail EIB / KNX actuators with 16 relay outputs that canbe configured as:

– 16 outputs for light / load control
–  16 channels for valve in PWM (solenoid actuators)
–  8 channels for roller shutter / venetian control
–  8 channels for 3-point valve control
–  4 fan coil actuators 2-pipes
It is also possible to combine 2 or 3 relays with logic interlock for 4-pipe / 3-speed fan coil control or combine groups of relays (up to 8) for special function using logic interlock .

Version BO16F01KNX-SD includes a microSD card reader with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

12 Channel KNX Relay by Eelectron

BO12B01KNX is a Din Rail 12 output 16 A actuator and can be used to:


• Control up to 12 independent loads / lights
• Control up to 6 independent blind / roller shutters with mechanical end position Device is intended to be installed on DIN rail. Used in smart home automation

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]