Outdoor Speaker

At home in the outdoors, Russound’s OutBack Speakers are perfect for patios, pools, porches, decks, and backyards. Relax in a lawn chair or tend your garden while enjoying your favorite tunes in the fresh air.

Rugged design for all-season enjoyment

1″ Teteron Tweeter for crisp, clear high frequency reproduction

Heavy-duty mounting bracket for sturdy installations

Bookshelf Foot included for use on a shelf or table-top

Gold-Plated push terminals for easy, corrosion-free wiring connections

For queries please contact :

[email protected]

03312887178

IO41 module by Eelectron

2 digital INPUTS (4 IN + 1 OUT) 230Vac power supply that can be configured as: 2 single channels directly connected to two lights / loads (e.g. On-Off control, excluding light dimming) or as 1 coupled channel to drive 1 remote shutter / load using a 2-way switch. Can be used to control from smartphone. This is the best smart home automation product for customers.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

DALI module by Eelectron

The brightness of the DALI lamps is controlled by the brightness sensor BT01A01OTO SENSOR connected to the IO42A01BLE device or by the brightness sensor on the Jackie IoT lamp. Smart home automation via smartphone from Eelectron Otomo. This device has 2 channels x 8 ECG Broadcast Integrated circadian cycle – 230Vac power supply

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

ENERGY METER 3P WITH TA CONNECTION – BY EELECTRON

This Energy-meter provides the essential measurement capabilities required to monitor a three phase electrical installation.
• Three-phases digital energy meter with connection by CT …/1 A up to 2000/1 A or by CT …/5 A up to 10.000/5 A 0.01-1(6) A – 2 Tarif
• LCD display and 3 push-button keys (to read Energies, V, I, PF, F, P, Q and to configure some parameters)
• 1 Push button and 1 LED dedicated to KNX.
• Display with 8 digits.
• Self supplied (by the input voltage itself).
•1 S0 pulse output proportional to Active Imported KWh
Device is intended to be installed on DIN rail.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

EXTERNAL TRANSPONDER READER

The TR22A11KNX from Eelectron is a external card reader is an EIB/KNX device dedicated to access control. This product is for both 2 modules round and squared inwall boxes or for 3 modules boxes, the plexiglass front of the product is available in two different colours. The device has two physical binary inputs available for controlling the door open / close contacts or freely configurable by the user (window contacts, bathroom pull alarms etc.). The device has two relays for lock management, courtesy light control or another use. On the reader front there are 4 LEDs, 3 of which are freely configurable, usually programmed to report about: access granted, access denied, emergency, make up room, room occupied or do not disturb.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

EMBEDDED PC WITH ESUITE

Software for managing hotels, for supervising KNX environments and for the control of accesses and alarms. Interfaces with management and other software. Remote management via own Internet or Ethernet. The package is available also with IP, USB, IP Router Interface.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

DIN VALVES / LOADS ACTUATOR 8 INPUTS / 4+4 OUTPUTS

The HA88B01KNX device is a DIN rail EIB / KNX actuator with 4 Triac outputs at 24… 230V AC for the control of thermoelectric valves and with 4 relays of 16A-230VAC; the devices also include 8 inputs for dry contacts (potential-free). The 4 Triac outputs can be configured as:
• 4 channels for valve control in ON / OFF or PWM
• 2 channels for 3-points valve control
The 4 Relay outputs can be configured as:
• 4 outputs for light / load control
• 4 channels for valve in PWM (solenoid actuators)
• 2 channels for roller shutter / venetian control
• 2 channels for 3-point valve control
• Groups of 2,3,4 relays for special function using logic interlock.

The device is suitable for the management of 2/4 pipes fan coils up to 3 speeds; the outputs not used by the application can be used to control other equipments. Inputs can be connected to buttons or switches (potential-free) and can be used for on / off commands, dimming, shutters or blinds / scenarios, sequences, step commands, etc. Inputs from 1 to 4 can be configured as outputs to activate single signaling LEDs (see eelectron leds code LD00A01ACC / LD00A11ACC) or can be configured as analogue inputs for the connection of NTC temperature probes (see eelectron probes code TS00A01ACC / TS00B01ACC ) with which to send 4 temperature measurements on the bus or to manage 4 complete thermostat modules.

Each thermostat module manages 2 stages with an integrated PI controller for controlling heating and cooling equipment, valves, 2 and 4 pipe fan coils, etc. Additional 3 thermostat modules are available in the device for a total of 4. Moreover, 7 logic blocks are available to implement simple expressions with logical or threshold operator or complex expressions with algebraic and conditional operators; It is possible to use predefined algorithms as proportional controls of temperature and humidity or dew point calculation.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Universal 12 Channel Relay by Eelectron

Device IO12F01KNX is a DIN rail EIB / KNX actuators with 12 relay outputs that can be configured as:

–  12 outputs for light / load control
–  12 channels for valve in PWM (solenoid actuators)
–  6 channels for roller shutter / venetian control
–  6 channels for 3-point valve control
–  3 fan coil actuators 2-pipes / 2 fan coil actuators 4-pipes

The device also includes 12 inputs that can be connected to pushbuttons, switches, or be configured as outputs to activate individual signalling LEDs (eelectron code LD00A01ACC / LD00A11ACC) and can be used for on / off, dimming, shutters or venetian blinds / scenarios, sequences, step-by-step commands, etc. 4 inputs (of the 12) are configurable as analogue for the connection of NTC temperature probes (see probes eelectron code TS00A01ACC / TS00B01ACC) with which to send 4 temperature measurements on the bus and manage a simple on / off controls (e.g. thermo furniture).
It is also possible to enable 3 complete thermostat modules; each thermostat module manages 2 stages with integrated PI controller for driving heating and cooling equipment, valves, 2 and 4-pipe fan coils, etc.

Version IO12F01KNX-SD includes a microSD card reader includes a microSD card with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Oria KNX “Switch” by EAE

Extendable up to 12 switches in a single frame, Oria switches can be programmed to control lighting, shutter/blind drivers, speakers, make scene calls and mimic panic buttons.

Oria  switches are offered in four different colours: Antique, Pearl White, Mustang gray and Anthracite

General Specifications

Optional status indication LEDs

Optional labeling on buttons

Does not require an external power supply

Installation ability to 60×60 mm standard switch junctions

Button configurations with following functions:

  • Switching
  • Dimming
  • Shutter/Blind control
  • Value and priority assignment
  • Scene control

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Rosa Crystal KNX Touch Switches

Rosa Crystal switches are designed for the needs of modern buildings. The new generation of frameless design was designed according to the expectations of the architects. Elegant and trendy touch with glass design in your interior!

Touch sensitivity…

Touch sensitivity switch with one to six equal surfaces, each with its own functions.
Superior touch function!

Glass Surface…

The Rosa Crystal family consists of a 4 mm tampered glass surface covered with conductive material. This allows for a safe operation as well as an elegant appearance.

Frameless minimalist design…

Modern look with 85 x 85mm frameless design

Wide range of colors…

Black and white color options as well as optional RAL cardela colors can be preferred.

Modes…

Away, comfort, night and protection mode options

Customize icon options…

With a glass surface, Rosa offers an unique user experience and intuitive operation with minimalist icon design.
Various icon options make it easy to use.

Independent programmable buttons…

Short – long press options on all buttons.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]