Universal 12 Channel Relay by Eelectron

Device IO12F01KNX is a DIN rail EIB / KNX actuators with 12 relay outputs that can be configured as:

–  12 outputs for light / load control
–  12 channels for valve in PWM (solenoid actuators)
–  6 channels for roller shutter / venetian control
–  6 channels for 3-point valve control
–  3 fan coil actuators 2-pipes / 2 fan coil actuators 4-pipes

The device also includes 12 inputs that can be connected to pushbuttons, switches, or be configured as outputs to activate individual signalling LEDs (eelectron code LD00A01ACC / LD00A11ACC) and can be used for on / off, dimming, shutters or venetian blinds / scenarios, sequences, step-by-step commands, etc. 4 inputs (of the 12) are configurable as analogue for the connection of NTC temperature probes (see probes eelectron code TS00A01ACC / TS00B01ACC) with which to send 4 temperature measurements on the bus and manage a simple on / off controls (e.g. thermo furniture).
It is also possible to enable 3 complete thermostat modules; each thermostat module manages 2 stages with integrated PI controller for driving heating and cooling equipment, valves, 2 and 4-pipe fan coils, etc.

Version IO12F01KNX-SD includes a microSD card reader includes a microSD card with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Neets MiniConnect

The Neets MiniConnect is an affordable easy-to-install tabletop solution that will remove all the usual cable clutter in your meeting room. It even comes with a cable bag to make sure it is easy to hide the cable.

It fit seamlessly into any meeting room, just like it improves the user experience in spaces such as huddle rooms, board rooms, or lecture halls.

With its sleek and Scandinavian design, it is ideal for both modern and more traditional interiors. It is easy mounted in a table, whether it is new interior or retrofit and with the MiniConnect in your meeting rooms you will minimize the cable clutter.

It is possible to connect from one to three cables, allowing you to customize connectivity to fit the specific needs in the room.

Please note: no cables are included in the box.

  • No cable clutter in meeting rooms
    It’s a perfect solution for getting cables under control and hide all the cables under the table
  • Top-integration in furniture
    With its stylish Scandinavian design it fits seamlessly into any type of table
  • Suitable for retrofit
    The design is ideal for both modern and more traditional interiors and is easily mounted
  • Easy installation
    It is easily installed into a table, all that is needed is a 102 mm drill
  • Compatible with all manufactures tables
    With its Scandinavian design it fits seamlessly into any type of table
  • Outstanding flexibility
    No pre-specified cables included. It can be customized to have one or up to three cables installed

Neets EasyConnect – Power

By using the Neets EasyConnect – Power together with an EasyConnect – Control, you will have more power sockets and cables for tabletop solutions.

The EasyConnect – Power comes in the same look and feel as the EasyConnect – Control, but has no control capabilities.

If you add a Neets Control – QueBec II you can make the EasyConnect – Power work as an automatic projector and screen control unit, giving it a stand-alone plug and play functionality.

  • Connectors
    Standard cables(1.7m);
    HDMI
    VGA
    3.5mm audio mini-jack
    Network cable (RJ45)
    USB-A
  • AC Power Connector 1
    EU, Universal, DK or Swiss power
  • AC Power Connector 2
    EU, Universal, DK or Swiss power
  • Easy to use
    No cables on the floor – AV cables (1.7 m) pull out and retract easily for storage
  • Plug and Play
    Add a QueBec II and the EasyConnect works as a plug and play automatic projector control