Smart Home Automation – Lighting Control System – Home Cinema
KNX Smart Home Systems, Building Automation, Audio Video Controls & Home Theater Systems
BO12B01KNX is a Din Rail 12 output 16 A actuator and can be used to:
• Control up to 12 independent loads / lights
• Control up to 6 independent blind / roller shutters with mechanical end position Device is intended to be installed on DIN rail. Used in smart home automation
We are proud to have the best building automation products in Pakistan.
Cell: +92-330-8867589
Cell: +92-331-2887178
Tel: +92-21-35250460
Email: [email protected]
Device BO04F01KNX is a DIN rail EIB / KNX actuators with 4 relay outputs that canbe configured as:
– 4 outputs for light / load control
– 4 channels for valve in PWM (solenoid actuators)
– 2 channels for roller shutter / venetian control
– 2 channels for 3-point valve control
– 1 fan coil actuators 2-pipes
Version BO04F01KNX-SD includes a microSD card reader with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.
Device BO08F01KNX is a DIN rail EIB / KNX actuators with 8 relay outputs that can be configured as:
– 8 outputs for light / load control
– 8 channels for valve in PWM (solenoid actuators)
– 4 channels for roller shutter / venetian control
– 4 channels for 3-point valve control
– 2 fan coil actuators 2-pipes
It is also possible to combine 2 or 3 relays with logic interlock for 4-pipe / 3-speed fan coil control or combine groups of relays (up to 8) for special function using logic interlock .
Version BO08F01KNX-SD includes a microSD card reader with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.
DM04A02KNX is a universal KNX 4 channel dimmer with automatic identification of the type of load and with adjustable parameters to optimize the control of different types of lamps such as LEDs, incandescent and halogen lamps, dimmable compact fluorescent lamps (CFL), low voltage lamps with electronic or ferromagnetic transformer. The 4 channels can be used independently or combined in pair (1+2 and 3+4) to drive higher power loads; always respect the maximum power values indicated in the table of this instruction sheet and check in the handbook how to configure the outputs as combined in ETS. To define the maximum load and in particular the maximum number of lamps that can be connected, the DimmerLoadTester software is available; with it is possible to analyze the peak absorption of a single lamp and calculate the maximum number of lamps that can be connected.
Each output channel can be used in the following configurations:
Trailing Edge [RC]: The dimmer turns off part of the final part of the waveform of the input voltage resulting in reduced lamp output. This load regulation is used for resistive or capacitive loads (typically halogen lamps with electronic transformer or incandescent lamps)
Leading Edge [L]: The dimmer turns off part of the initial part of the waveform of the input voltage, resulting in reduced lamp output. This load regulation is used for inductive loads (typically ferromagnetic transformers or toroidal)
Kingfisher LED High Bay LED-C gives excellent light output for a variety of interior industrial and commercial lighting applications, offering high performance coupled with visual comfort.
Luminaire Lumens 13,000–26,000
LED Lumens 17,000–34,000
Power 100W–200W
Efficacy 130 luminaire lm/W
4000K, CRI >70
Lifetime >54,000hr L70
Stirrup mounted
Warehousing & logistics
Manufacturing
Loading bays
Atria
High-ceiling retail
Commercial foyers/high-ceiling interiors
For queries please contact below
Cell: +92-331-2887178
Cell: +92-313-8867581
Zactis is a high-performance flat-to-ground LED flood light perfect for sports, high mast and area applications. As well as facilitating easy installation and maintenance, the sleek, low-profile design, reduces the load together with decreasing windage.
The luminaire shall be manufactured from high pressure die-cast aluminium. It shall have a luminaire efficacy of at least 114 luminaire lm/W and will be capable of producing up to 32,571 luminaire lumens at 4000K. The luminaire will be rated at IP65 and IK08.
With a peak intensity of 70°, Zactis achieves excellent performance while still complying with BREEAM & the ILP guidance notes on obtrusive light. Designed and Engineered in UK.
Luminaire Lumens up to 32,571
Power 142W–285W
4000K
Asymmetrical distribution with the peak at 70 degrees allowing flat-to-ground orientation
Stirrup mounted
DALI dimmable as standard
Plug and socket connection
Photocell and NEMA options
Designed and Engineered in the UK
Sports
High mast lighting
Area lighting
Security
Car parks
For queries please contact below
Cell: +92-331-2887178
Cell: +92-313-8867581
Tel: +92-21-35250460
Email: [email protected]
Kingfisher LED High Bay LED-S gives excellent light output for a variety of interior industrial and commercial lighting applications, offering high performance coupled with visual comfort.
Luminaire Lumens 6,800–68,000
LED Lumens 8,000–80,000
Power 40W–400W
Efficiency 170 luminaire lm/W
4000K, CRI >70
Lifetime >54,000hr L80
Stirrup mounted
Warehousing & logistics
Manufacturing
Loading bays
Atria
High-ceiling retail
Commercial foyers/high-ceiling interiors
For queries please contact below
Cell: +92-331-2887178
Cell: +92-313-8867581
Tel: +92-21-35250460
Email: [email protected]
The Neets MiniConnect is an affordable easy-to-install tabletop solution that will remove all the usual cable clutter in your meeting room. It even comes with a cable bag to make sure it is easy to hide the cable.
It fit seamlessly into any meeting room, just like it improves the user experience in spaces such as huddle rooms, board rooms, or lecture halls.
With its sleek and Scandinavian design, it is ideal for both modern and more traditional interiors. It is easy mounted in a table, whether it is new interior or retrofit and with the MiniConnect in your meeting rooms you will minimize the cable clutter.
It is possible to connect from one to three cables, allowing you to customize connectivity to fit the specific needs in the room.
Please note: no cables are included in the box.
By using the Neets EasyConnect – Power together with an EasyConnect – Control, you will have more power sockets and cables for tabletop solutions.
The EasyConnect – Power comes in the same look and feel as the EasyConnect – Control, but has no control capabilities.
If you add a Neets Control – QueBec II you can make the EasyConnect – Power work as an automatic projector and screen control unit, giving it a stand-alone plug and play functionality.
Extruded aluminium profile with microprism or opal diffuser, this light is empty from inside and has light coming from the sides, could be flush mounted in false ceiling or it can be hanged
Designed to deliver functional general lighting in an architectural interesting way for areas that welcome something different
Semi recessed mounted in 15mm or 24mm exposed grid ceilings. Ceiling tile is placed back onto of fixture.
Driver = Fixed Output
Lumens = 2800
Power = 31 (Watts)
Color Temp = 4000k
Dimension = 595x595mm Architectural LuxFrame
Lifetime Hours = 50,000
Company = Luceco UK