2 digital INPUTS (4 IN + 1 OUT) 230Vac power supply that can be configured as: 2 single channels directly connected to two lights / loads (e.g. On-Off control, excluding light dimming) or as 1 coupled channel to drive 1 remote shutter / load using a 2-way switch. Can be used to control from smartphone. This is the best smart home automation product for customers.
We are proud to have the best smart home and building automation products in Pakistan.
The brightness of the DALI lamps is controlled by the brightness sensor BT01A01OTO SENSOR connected to the IO42A01BLE device or by the brightness sensor on the Jackie IoT lamp. Smart home automation via smartphone from Eelectron Otomo. This device has 2 channels x 8 ECG Broadcast Integrated circadian cycle – 230Vac power supply
We are proud to have the best smart home and building automation products in Pakistan.
• This Energy-meter provides the essential measurement capabilities required to monitor a single phase electrical installation.
• 0.25-5 (63) A, Class B, 230 VAC 50 Hz, -25 °C … +55 °C, 4 Quadrants, 2 Tariffs. • Active Energy Class B (according to EN-50470) and Reactive Energy Class 2 (according to IEC 62053-23) • Direct connected (up to 63 A) • LCD display and 3 push-button keys (to read Energies, V, I, PF, F, P, Q and to configure some parameters) • 1 push botton and 1 LED dedicated to KNX. • Display with 8 digits. • Self supplied (by the input voltage itself).
Device is intended to be installed on DIN rail.
We are proud to have the best smart home and building automation products in Pakistan.
• This Energy-meter provides the essential measurement capabilities required to monitor a three phase electrical installation.
• Direct connected (up to 63 A) • LCD display and 3 push-button keys (to read Energies, V, I, PF, F, P, Q and to configure some parameters) • 1 push botton and 1 LED dedicated to KNX. • Display with 8 digits. • Self supplied (by the input voltage itself).
Device is intended to be installed on DIN rail.
We are proud to have the best smart home and building automation products in Pakistan.
This Energy-meter provides the essential measurement capabilities required to monitor a three phase electrical installation. • Three-phases digital energy meter with connection by CT …/1 A up to 2000/1 A or by CT …/5 A up to 10.000/5 A 0.01-1(6) A – 2 Tarif • LCD display and 3 push-button keys (to read Energies, V, I, PF, F, P, Q and to configure some parameters) • 1 Push button and 1 LED dedicated to KNX. • Display with 8 digits. • Self supplied (by the input voltage itself). •1 S0 pulse output proportional to Active Imported KWh Device is intended to be installed on DIN rail.
We are proud to have the best smart home and building automation products in Pakistan.
The TH22AxxKNX transponder holder is an EIB / KNX device fitted in rectangular boxes with 2 or 3 modules, and can be used for detecting and monitoring the presence of customers or service staff in a room. A range of colours is available for plastic housing, and glass finishes can be ordered separately, and it can be connected to all types of environments. The device has two physical ON / OFF inputs for controlling an open / close door contact or other signals (e.g. window contacts, bathroom alarm pulls, etc.). On the device there are two relays to control the door lock and to control the ” courtesy lighting “, or for any other freely configurable use. The front of the transponder is illuminated if no light is available (for dark locations), goes out if the card is invalid, and flashes for 3 seconds if access is not allowed. Card validation is made by checking the following data: -“number system”, if the code is coherent, it verifies the “date” field (if enabled) to verify validity (if this hasn’t expired). It then checks the “password” with all the associated and enabled codes (time, customer number, service number). If all the conditions matched, then is possible to open the door and, if set, turns on the courtesy light and sends the result to the bus. Configuration via ETS.
We are proud to have the best smart home and building automation products in Pakistan.
The TR22A01KNX card reader is an KNX device dedicated to access card control with the transponder; it is customizable versatile and modular, and suitable for almost any application. Mounting boxes are embedded, rectangular or round with 2 or 3 modules. Different color ranges available and glass finishes can be ordered separately, allowing the unit to be matched with every kind of design. The device has two physical ON / OFF inputs available for controlling the door open / close contacts or other signals (window contacts, bathroom pull alarms etc.). The device has two relays for lock management, courtesy light control or another use. On the reader front there are 4 LEDs, 3 of which are freely configurable, and used respectively for the reporting about: access granted, access denied, emergency, required room redo, room occupied or do not disturb. The transponder reading can be made at a distance of 30 mm. The primary feature is the number-control facility. If the code is consistent, the device will continue by verifying the validity of the “date” field (if enabled). Then the “password” will be checked with the associated codes with it (hours, customer number, service number), and enabled. If verified, the door will open, and (if set), the courtesy light will be turned on, and the reading will be forwarded to the bus. ETS configuration.
We are proud to have the best smart home and building automation products in Pakistan.
The TR22A11KNX from Eelectron is a external card reader is an EIB/KNX device dedicated to access control. This product is for both 2 modules round and squared inwall boxes or for 3 modules boxes, the plexiglass front of the product is available in two different colours. The device has two physical binary inputs available for controlling the door open / close contacts or freely configurable by the user (window contacts, bathroom pull alarms etc.). The device has two relays for lock management, courtesy light control or another use. On the reader front there are 4 LEDs, 3 of which are freely configurable, usually programmed to report about: access granted, access denied, emergency, make up room, room occupied or do not disturb.
We are proud to have the best smart home and building automation products in Pakistan.
The Transponder Reader TR32Ax9KNX is 2 IN / 2 OUT + BELL and a KNX wall mounting device suitable to access control application. This device can be used in any kind of building (Hotel, Hospital, Offices, Parking, etc..) where the access control application is required. The device is equipped with two binary inputs (potential free contacts) that can be used, for instance, to control whether the door lock has been opened or closed or other signals coming from external switches/contacts (i.e. windows, bathroom emergency alarms, etc..) and with one frontal switch freely configurable by ETS. The transponder reader is equipped also with two output relays which can be used for any purposes, typically to open the door or turning on the courtesy light inside the room. The product provides on the front side four LEDs in order to enlighten 4 icons to display the following states (e.g. in case of Hotel management): – Access Allowed/Not Allowed – SOS request – Service Call (clean room, etc..) – Client status (“Busy room” or “Do not Disturb”) The LEDs and icons can be configured in association with other alarms or events. The transponder reader can reads cards or keys at a maximum distance of 30mm from the front side. The access control follows a sequence where the “build number” has been checked at first, then the “data” to check if it has been elapsed or not, next the password ID for client/ guest/service identification, then the enabled entrance timing window. In case card reading pass all checks the door is opened and, if set, the courtesy light inside is switched on. At the same time the Transponder Holder can send the reading response to the bus. The device configuration for commissioning in terms of physical address, group addresses and parameters is done with ETS ( Engineering Tool Software) through a download of the Application Program.
We are proud to have the best smart home and building automation products in Pakistan.
Dimensions and characteristics of the Card Complies with ISO 7810 (85.6 x 54 x 0.76 mm) Possibility of serigraphy on both sides (on request) Dual technology version (RFID and magnetic stripe on request)
We are proud to have the best smart home and building automation products in Pakistan.
