Posted on

GATEWAY OTOMO-KNX

The bidirectional communication between the two systems allows to introduce in KNX installations the advantages of the typical functions of an OTOMO system, such as the recognition of the presence of a user in an environment via Mobile App and Beacon or the exchange of information, commands, stayed between the two installations.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

Beacon by Eelectron

Allows recognition of the presence of a user in an environment in place or in the absence of mobile devices.
Performance and reduced consumption, average duration of 5 years or more.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

2-channel light and presence sensor by Eelectron

It is a PIR sensor for recessed ceiling mounting. The load is activated automatically when motion is detected and the ambient brightness is below the set Lux value. Not detecting any movement and after waiting for the pre-set delay time, the load will be turned off automatically.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

IO40 module by Eelectron

2 digital INPUTS (4 IN + 0 OUT) with 230Vac power supply can be configured as: 2 single channels directly connected to two lights / loads (e.g. On-Off control, excluding light dimming) or as 1 coupled channel to drive 1 remote shutter / load using a 2-way switch. The best smart home automation in

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

IO41 module by Eelectron

2 digital INPUTS (4 IN + 1 OUT) 230Vac power supply that can be configured as: 2 single channels directly connected to two lights / loads (e.g. On-Off control, excluding light dimming) or as 1 coupled channel to drive 1 remote shutter / load using a 2-way switch. Can be used to control from smartphone. This is the best smart home automation product for customers.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

DALI module by Eelectron

The brightness of the DALI lamps is controlled by the brightness sensor BT01A01OTO SENSOR connected to the IO42A01BLE device or by the brightness sensor on the Jackie IoT lamp. Smart home automation via smartphone from Eelectron Otomo. This device has 2 channels x 8 ECG Broadcast Integrated circadian cycle – 230Vac power supply

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

ENERGY METER SINGLE PHASE 63A BY EELECTRON

• This Energy-meter provides the essential measurement capabilities required to monitor a single phase electrical installation.

• 0.25-5 (63) A, Class B, 230 VAC 50 Hz, -25 °C … +55 °C, 4 Quadrants, 2 Tariffs.
• Active Energy Class B (according to EN-50470) and Reactive Energy Class 2 (according to IEC 62053-23)
• Direct connected (up to 63 A)
• LCD display and 3 push-button keys (to read Energies, V, I, PF, F, P, Q and to configure some parameters)
• 1 push botton and 1 LED dedicated to KNX.
• Display with 8 digits.
• Self supplied (by the input voltage itself).

Device is intended to be installed on DIN rail.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

ENERGY METER THREE PHASE 63A BY EELECTRON

• This Energy-meter provides the essential measurement capabilities required to monitor a three phase electrical installation.

• Direct connected (up to 63 A)
• LCD display and 3 push-button keys (to read Energies, V, I, PF, F, P, Q and to configure some parameters)
• 1 push botton and 1 LED dedicated to KNX.
• Display with 8 digits.
• Self supplied (by the input voltage itself).

Device is intended to be installed on DIN rail.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

ENERGY METER 3P WITH TA CONNECTION – BY EELECTRON

This Energy-meter provides the essential measurement capabilities required to monitor a three phase electrical installation.
• Three-phases digital energy meter with connection by CT …/1 A up to 2000/1 A or by CT …/5 A up to 10.000/5 A 0.01-1(6) A – 2 Tarif
• LCD display and 3 push-button keys (to read Energies, V, I, PF, F, P, Q and to configure some parameters)
• 1 Push button and 1 LED dedicated to KNX.
• Display with 8 digits.
• Self supplied (by the input voltage itself).
•1 S0 pulse output proportional to Active Imported KWh
Device is intended to be installed on DIN rail.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

TRANSPONDER HOLDER KNX 2 IN / 2 OUT BY EELECTRON

The TH22AxxKNX transponder holder is an EIB / KNX device fitted in rectangular boxes with 2 or 3 modules, and can be used for detecting and monitoring the presence of customers or service staff in a room.
A range of colours is available for plastic housing, and glass finishes can be ordered separately, and it can be connected to all types of environments. The device has two physical ON / OFF inputs for controlling an open / close door contact or other signals (e.g. window contacts, bathroom alarm pulls, etc.). On the device there are two relays to control the door lock and to control the ” courtesy lighting “, or for any other freely configurable use. The front of the transponder is illuminated if no light is available (for dark locations), goes out if the card is invalid, and flashes for 3 seconds if access is not allowed. Card validation is made by checking the following data: -“number system”, if the code is coherent, it verifies the “date” field (if enabled) to verify validity (if this hasn’t expired). It then checks the “password” with all the associated and enabled codes (time, customer number, service number). If all the conditions matched, then is possible to open the door and, if set, turns on the courtesy light and sends the result to the bus. Configuration via ETS.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]