Posted on

UNIVERSAL DIMMER 4 CHANNELS

DM04A02KNX is a universal KNX 4 channel dimmer with automatic identification of the type of load and with adjustable parameters to optimize the control of different types of lamps such as LEDs, incandescent and halogen lamps, dimmable compact fluorescent lamps (CFL), low voltage lamps with electronic or ferromagnetic transformer. The 4 channels can be used independently or combined in pair (1+2 and 3+4) to drive higher power loads; always respect the maximum power values indicated in the table of this instruction sheet and check in the handbook how to configure the outputs as combined in ETS. To define the maximum load and in particular the maximum number of lamps that can be connected, the DimmerLoadTester software is available; with it is possible to analyze the peak absorption of a single lamp and calculate the maximum number of lamps that can be connected.

Each output channel can be used in the following configurations:

Trailing Edge [RC]: The dimmer turns off part of the final part of the waveform of the input voltage resulting in reduced lamp output. This load regulation is used for resistive or capacitive loads (typically halogen lamps with electronic transformer or incandescent lamps)

Leading Edge [L]: The dimmer turns off part of the initial part of the waveform of the input voltage, resulting in reduced lamp output. This load regulation is used for inductive loads (typically ferromagnetic transformers or toroidal)

Posted on

URC

Think Beyond Everyday URC is a global leader in smart home automation and control solutions. URC technology is respected for unsurpassed performance and reliability with over 100 million remote controls sold in the past 10 years alone. URC control systems include Total Control, MX HomePro and Complete Control. Innovative URC user interfaces include tabletop controllers, in-wall touchscreens, handheld remotes, keypads and mobile apps – plus voice control integration with Amazon Alexa and Google Assistant. URC systems are custom designed, installed and maintained by a network of URC trained systems integration professionals. Its award-winning technical support and training URC the best choice for home automation.

Posted on

GIANO IOT LAMP

Power supply 230Vac – 77W 5521lm/100W 7361lm
Giano IoT is a Bluetooth-driven direct and indirect suspension lamp with embedded on/off control.

Automatic On with OTOMO users presence detection

Posted on

JACKIE IOT LAMP

Jackie IoT is a Bluetooth® driven LED table & floor lamp with embedded brightness and temperature sensor
Power supply 230Vac – 10W 526lm

Automatic On with OTOMO users presence detection; On/Off and dimmer by OTOMO APP.
Embedded brightness sensor do not drives LED Jackie_IOT lamp itself.

Posted on

OTOMO KNX Gateway

IN00A01BLE is a built-in KNX device that acts as a two-way gateway between the KNX bus and the OTOMO Bluetooth® mesh; it includes 2 analog inputs for the connection of a BT01A01OTO temperature and brightness probe and a 10A – 230V relay with dry contacts. The two-way communication between the two systems allows to introduce in KNX installations the advantages of the typical functions of an OTOMO system such as the presence detection – via Mobile App and Beacon – of a user in an environment or the opportunity to transfer information, commands, states between one system and the other. The product includes a thermostat module capable of managing 2 stages with integrated PI controller for the control of heating and cooling equipment, valves, 2 and 4-pipe fan coils, etc.

Posted on

Presence Detector 2 Channel – Ceiling detector – PIR Detector

The device is a ceiling flush mount PIR detector. The load will be switched on automatically when the movement is detected and the ambient light level is below the Lux setting value. Until there is no movement detected and the pre-set delay time has been expired, load will be switched off automatically. User can pre-set the desired Lux and Time values by VR or IR setting for automatic control lighting on / off with low initial cost and great energy saving potential.

Posted on

Miniswitch KNX

New Miniswitches KNX suitable with plates of Eelecta’s range 2 or 4 modules or Glass Frames in 3 or 4 modules. The range is composed by 3 models that include 1, 2 or 4 channels switches with a dimension of 45×45 mm (frame not included). For each channel are available 2 signaling led’s (white/blue). The switches are available in 2 different colours (white or anthracite) and the plates in 3 colours (white, silver e black).

Posted on

EELECTA HOMEPAD KNX

Eelecta Homepad pushbutton range of KNX devices is divided in 5 different models based on the number of switch, input and temperature sensors provided with the device.

Scheme Eelecta switches range:
PB40AxxCON – 4 CHANNELS CONVENTIONAL
PB40BxxKNX – 4 CHANNELS KNX
PB40CxxKNX – 4 CHANNELS KNX + 4 INPUTS + TEMPERATURE SENSOR
PB80AxxKNX – 8 CHANNELS KNX + TEMPERATURE SENSOR
PB80CxxKNX – 8 CHANNELS KNX + TEMPERATURE SENSOR + CIRCULAR FUNCTIONS

Product has 4 (8) push buttons which can be configured to manage lights, dimmers, shutters, etc. ; and 4 inputs (where present) on the backside to interface free potential contacts (for example sensors, traditional buttons, etc.).

Posted on

9025 CAPACITIVE KNX SWITCH – RGB RANGE

The KNX® 9025 switch range consists of 2 – 4 – 6 – 8 – 10 channels capacitive buttons. Each button can be configured to manage on/off commands, dimming, shutters and venetians control, scene recall and control, objects sequences etc. ; Device includes a 2 stage Room Temperature Controller with integrated PI to control heating and cooling equipment, valves, 2 and 4 pipes fan coils; etc.. Device has an embedded temperature sensor and a rear 2 poles connector configurable as digital or analog input; It’s possible to connect an additional NTC temperature probe (Eelectron codes TS01A01ACC or TS01B01ACC – not included) to perform a direct temperature measurement.
9025 range has a RGB led bar on the front side in order to visualize feedbacks or other values available over the KNX bus (function available on the RGB range).Devices are available in 2 ranges: STANDARD and RGB; each range may have glasses in CUSTOM version. Using glasses in CUSTOM version is possible to light up custom and interchangeable icons matching with the associated function. The 9025 KNX® range is mounted in 2 module box and is compliant with main standards (British, German, Italian, etc).Device is equipped with KNX communication interface.

Posted on

Horizone Mini Web Server

HORIZONE MINI is a webserver specifically engineered for supervision and monitoring of Home & Building Automation systems. Based on KNX standard and suitable for integration with Modbus standard. Compatible with operating system Mac OS X, Microsoft Windows, Apple iOS and Google Android, the configuration and use of HORIZONE MINI takes place directly through its web interface, which can be accessed through a the most popular browser on the market browser from any device (pc/mac, smartphone e tablet) or with free app available on iOS and Android store.