Posted on

DIN VALVES / LOADS ACTUATOR 8 INPUTS / 4+4 OUTPUTS

The HA88B01KNX device is a DIN rail EIB / KNX actuator with 4 Triac outputs at 24… 230V AC for the control of thermoelectric valves and with 4 relays of 16A-230VAC; the devices also include 8 inputs for dry contacts (potential-free). The 4 Triac outputs can be configured as:
• 4 channels for valve control in ON / OFF or PWM
• 2 channels for 3-points valve control
The 4 Relay outputs can be configured as:
• 4 outputs for light / load control
• 4 channels for valve in PWM (solenoid actuators)
• 2 channels for roller shutter / venetian control
• 2 channels for 3-point valve control
• Groups of 2,3,4 relays for special function using logic interlock.

The device is suitable for the management of 2/4 pipes fan coils up to 3 speeds; the outputs not used by the application can be used to control other equipments. Inputs can be connected to buttons or switches (potential-free) and can be used for on / off commands, dimming, shutters or blinds / scenarios, sequences, step commands, etc. Inputs from 1 to 4 can be configured as outputs to activate single signaling LEDs (see eelectron leds code LD00A01ACC / LD00A11ACC) or can be configured as analogue inputs for the connection of NTC temperature probes (see eelectron probes code TS00A01ACC / TS00B01ACC ) with which to send 4 temperature measurements on the bus or to manage 4 complete thermostat modules.

Each thermostat module manages 2 stages with an integrated PI controller for controlling heating and cooling equipment, valves, 2 and 4 pipe fan coils, etc. Additional 3 thermostat modules are available in the device for a total of 4. Moreover, 7 logic blocks are available to implement simple expressions with logical or threshold operator or complex expressions with algebraic and conditional operators; It is possible to use predefined algorithms as proportional controls of temperature and humidity or dew point calculation.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

20 Channel Lighting Control Relay by EAE

EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs.

General Specifications

Does not require an external power supply, 20x16A Outputs

Room Control Unit covers all requirements of control in room applications and offers following functions:

  • Light switch
  • AC/DC blind control
  • Fan control
  • Fan Coil Control (2 & 3 point valve)
  • Dry contact inputs

Switching resistive, capacitive and inductive loads in accordance with EN 60669 with following functions:

  • Staircase
  • External logic
  • Priority
  • Threshold
  • Operating hour
  • Sweep

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Posted on

RCU1200 12 Channel KNX Relay

EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs.

General Specifications

Does not require an external power supply, 12x16A Outputs

Room Control Unit offers following functions:

  • Light switch
  • AC/DC blind control
  • Fan control
  • Fan Coil Control (2 & 3 point valve)
  • Dry contact inputs

Switching resistive, capacitive and inductive loads in accordance with EN 60669 with following functions:

  • Staircase
  • External logic
  • Priority
  • Threshold
  • Operating hour
  • Sweep

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Posted on

SW104 – 4 Channel KNX Relay

4x16A, 500A Inrush Current

In addition to switching resistive loads, SW108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers for smart home automation

General Specification

4 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

  • Stair function
  • External logic
  • Internal logic
  • Priority function
  • Threshold function
  • Transaction time
  • Sweep function

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Posted on

SW108 – 8 Channel KNX Relay

8x16A, 500A Inrush Current

In addition to switching resistive loads, SW108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

General Specification

8 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

  • Stair function
  • External logic
  • Internal logic
  • Priority function
  • Threshold function
  • Transaction time
  • Sweep function

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Posted on

UD105 KNX Universal Dimmer EAE

General Specification

Incandescent lamp, halogen lamp, dimmable LED and fluorescent lamps can be dimmed up to 1500W in 5 parallel channels for smart home systems

Flexibility to connect loads even below 1W (LED bulbs) without any lower limit

5 independent channels that can be parameterized via ETS4/ETS5.

Manual operation feature for each channel using membrane switches.

Each channel can actualize any of these functions separately.

Following function list provided;

  • Staircase
  • Scene
  • Operating Hour
  • Forced Operation

Configurable behavior after voltage return, voltage failure or ETS download.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Posted on

CONSTANT VOLTAGE LED DIMMER 4 CHANNELS KNX by Eelectron

DL04A01KNX is a dimming actuator for LED in DC with constant voltage (CV).
The device allows to drive 4 independent channels or 1 RGB channel and 1 single color channel or 1 channel RGBW. Module can be powered from 12 to 48V DC and consequently can manage the outputs (LED strips) with voltage from 12 to 48V DC. The maximum current for each channel is 4A;
The device includes a 16A relay, suitable for switching capacitive loads, that allows a complete shutdown of the external power supply when all loads are switched off (for example at night) ensuring the maximization of the energy saving. On the front panel of DL04A01KNX there are 4 local switching buttons with corresponding status LED and a LED for signaling faults: short circuit on the output, over-temperature, power connection with reversed polarity, insufficient auxiliary power supply voltage. Available functions include block, logic, scenes, color sequences, etc ..
Device is equipped with KNX communication interface.

Posted on

16 Channel KNX Relay by Eelectron

Device  BO16F01KNX is a DIN rail EIB / KNX actuators with 16 relay outputs that canbe configured as:

– 16 outputs for light / load control
–  16 channels for valve in PWM (solenoid actuators)
–  8 channels for roller shutter / venetian control
–  8 channels for 3-point valve control
–  4 fan coil actuators 2-pipes
It is also possible to combine 2 or 3 relays with logic interlock for 4-pipe / 3-speed fan coil control or combine groups of relays (up to 8) for special function using logic interlock .

Version BO16F01KNX-SD includes a microSD card reader with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Posted on

12 Channel KNX Relay by Eelectron

BO12B01KNX is a Din Rail 12 output 16 A actuator and can be used to:


• Control up to 12 independent loads / lights
• Control up to 6 independent blind / roller shutters with mechanical end position Device is intended to be installed on DIN rail. Used in smart home automation

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Posted on

UNIVERSAL DIN MODULE 4 OUTPUTS PLUS by Eelectron

Device BO04F01KNX is a DIN rail EIB / KNX actuators with 4 relay outputs that canbe configured as:

– 4 outputs for light / load control
–  4 channels for valve in PWM (solenoid actuators)
–  2 channels for roller shutter / venetian control
–  2 channels for 3-point valve control
–  1 fan coil actuators 2-pipes

Version BO04F01KNX-SD includes a microSD card reader with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.