Posted on

9025 MULTISENSOR CONTROLLER (CO2 – HUMIDITY – TEMPERATURE) by Eelectron

The environmental sensor MC06A01KNX is a device of the 9025 series, it is wall-mounted and finished with a white or black glass. In the device there are 3 sensors available: temperature, humidity and CO2, this measure is detected by using an integrated probe specially designed to detect CO2 data directly and not through calculations based on other sensors. The device is also equipped with a 2-way connector on the rear side that can be configured as a digital or analogue input; in fact it is possible to connect an additional NTC probe to the device (eelectron code TS01A01ACC or TS01B01ACC – not included) to obtain a second temperature measurement. The device includes 2 double-stage thermostats for controlling two distinct areas, both with an integrated PI controller for driving heating and cooling equipment, valves, 6-way valves, 2 and 4-pipe fan coils, etc ..; The humidity sensor manages the reading of the relative humidity in the environment and allows threshold control with hysteresis of humidification and dehumidification equipments. The device embeds 6 capacitive keys for the management of on / off commands, dimmers, shutters and blinds, execution and learning of scenarios, object sequences, local thermostat controls, etc. It includes a RGB LED on the front side for displaying status (temperature, humidity and CO2) or other quantities available on the KNX bus.  Device is intended to be used in British Box, German Box or Italian 2 module box.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

9025 – HUMIDITY – TEMPERATURE CONTROLLER by Eelectron

The environmental sensor HC06A01KNX is a device of the 9025 series, it is wall-mounted and finished with a white or black glass. The device integrates humidity and temperature sensors. The device is also equipped with a 2-way connector on the rear side that can be configured as a digital or analogue input; in fact it is possible to connect an additional NTC probe to the device (eelectron code TS01A01ACC or TS01B01ACC – not included) to obtain a second temperature measurement. The device includes 2 double-stage thermostats for controlling two distinct areas, both with an integrated PI controller for driving heating and cooling equipment, valves, 6-way valves, 2 and 4-pipe fan coils, etc ..; The humidity sensor manages the reading of the relative humidity in the environment and allows threshold control with hysteresis of humidification and dehumidification equipments. The device embeds 6 capacitive keys for the management of on / off commands, dimmers, shutters and blinds, execution and learning of scenarios, object sequences, local thermostat controls, etc. It includes a RGB LED on the front side for displaying status (temperature, humidity and CO2) or other quantities available on the KNX bus.  Device is intended to be used in British Box, German Box or Italian 2 module box.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

UNIVERSAL FANCOIL CONTROLLER 0-10 by Eelectron

The TC57A01KNX device is a DIN rail EIB / KNX actuator for fan coil units control. The device has 3 0-10 V outputs and 3×16 A relays. Two 0-10 V outputs are dedicated to the management of proportional valves, variable speed management be done with the third 0-10 V output or with the 3 relays on board. If relays are not used for speeds, they can activate lights or other loads. An input is also available for reading 0-10V or 4-20mA signals to interface external probes for temperature, humidity, CO2, etc; the third 0-10 V output can also be configured in this mode, as input. There are also 5 digital inputs for dry contacts in order to connect buttons, window contacts, alarms; 2 inputs can be connected to NTC temperature probes (eelectron codes TS00A01ACC and TS00B01ACC). The logic inside the device can manage a 2/4 pipes fan coil with an internal 2-stage PI algorithm. A sophisticated parameterization allows its use in modern systems that require a differentiation of the behavior between speed and valves (independent regulation differentials), ventilation to avoid air stratification, logics for efficient maintenance of comfort and energy saving.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Posted on

Universal 12 Channel Relay by Eelectron

Device IO12F01KNX is a DIN rail EIB / KNX actuators with 12 relay outputs that can be configured as:

–  12 outputs for light / load control
–  12 channels for valve in PWM (solenoid actuators)
–  6 channels for roller shutter / venetian control
–  6 channels for 3-point valve control
–  3 fan coil actuators 2-pipes / 2 fan coil actuators 4-pipes

The device also includes 12 inputs that can be connected to pushbuttons, switches, or be configured as outputs to activate individual signalling LEDs (eelectron code LD00A01ACC / LD00A11ACC) and can be used for on / off, dimming, shutters or venetian blinds / scenarios, sequences, step-by-step commands, etc. 4 inputs (of the 12) are configurable as analogue for the connection of NTC temperature probes (see probes eelectron code TS00A01ACC / TS00B01ACC) with which to send 4 temperature measurements on the bus and manage a simple on / off controls (e.g. thermo furniture).
It is also possible to enable 3 complete thermostat modules; each thermostat module manages 2 stages with integrated PI controller for driving heating and cooling equipment, valves, 2 and 4-pipe fan coils, etc.

Version IO12F01KNX-SD includes a microSD card reader includes a microSD card with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]