DALI module by Eelectron

The brightness of the DALI lamps is controlled by the brightness sensor BT01A01OTO SENSOR connected to the IO42A01BLE device or by the brightness sensor on the Jackie IoT lamp. Smart home automation via smartphone from Eelectron Otomo. This device has 2 channels x 8 ECG Broadcast Integrated circadian cycle – 230Vac power supply

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

ENERGY METER 3P WITH TA CONNECTION – BY EELECTRON

This Energy-meter provides the essential measurement capabilities required to monitor a three phase electrical installation.
• Three-phases digital energy meter with connection by CT …/1 A up to 2000/1 A or by CT …/5 A up to 10.000/5 A 0.01-1(6) A – 2 Tarif
• LCD display and 3 push-button keys (to read Energies, V, I, PF, F, P, Q and to configure some parameters)
• 1 Push button and 1 LED dedicated to KNX.
• Display with 8 digits.
• Self supplied (by the input voltage itself).
•1 S0 pulse output proportional to Active Imported KWh
Device is intended to be installed on DIN rail.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

TRANSPONDER HOLDER KNX 2 IN / 2 OUT BY EELECTRON

The TH22AxxKNX transponder holder is an EIB / KNX device fitted in rectangular boxes with 2 or 3 modules, and can be used for detecting and monitoring the presence of customers or service staff in a room.
A range of colours is available for plastic housing, and glass finishes can be ordered separately, and it can be connected to all types of environments. The device has two physical ON / OFF inputs for controlling an open / close door contact or other signals (e.g. window contacts, bathroom alarm pulls, etc.). On the device there are two relays to control the door lock and to control the ” courtesy lighting “, or for any other freely configurable use. The front of the transponder is illuminated if no light is available (for dark locations), goes out if the card is invalid, and flashes for 3 seconds if access is not allowed. Card validation is made by checking the following data: -“number system”, if the code is coherent, it verifies the “date” field (if enabled) to verify validity (if this hasn’t expired). It then checks the “password” with all the associated and enabled codes (time, customer number, service number). If all the conditions matched, then is possible to open the door and, if set, turns on the courtesy light and sends the result to the bus. Configuration via ETS.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Universal 12 Channel Relay by Eelectron

Device IO12F01KNX is a DIN rail EIB / KNX actuators with 12 relay outputs that can be configured as:

–  12 outputs for light / load control
–  12 channels for valve in PWM (solenoid actuators)
–  6 channels for roller shutter / venetian control
–  6 channels for 3-point valve control
–  3 fan coil actuators 2-pipes / 2 fan coil actuators 4-pipes

The device also includes 12 inputs that can be connected to pushbuttons, switches, or be configured as outputs to activate individual signalling LEDs (eelectron code LD00A01ACC / LD00A11ACC) and can be used for on / off, dimming, shutters or venetian blinds / scenarios, sequences, step-by-step commands, etc. 4 inputs (of the 12) are configurable as analogue for the connection of NTC temperature probes (see probes eelectron code TS00A01ACC / TS00B01ACC) with which to send 4 temperature measurements on the bus and manage a simple on / off controls (e.g. thermo furniture).
It is also possible to enable 3 complete thermostat modules; each thermostat module manages 2 stages with integrated PI controller for driving heating and cooling equipment, valves, 2 and 4-pipe fan coils, etc.

Version IO12F01KNX-SD includes a microSD card reader includes a microSD card with which you can save the programming of the device to be able to restore it on an identical device in order to avoid programming in field or to allow a fast restore in case of failure.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Oria KNX “Switch” by EAE

Extendable up to 12 switches in a single frame, Oria switches can be programmed to control lighting, shutter/blind drivers, speakers, make scene calls and mimic panic buttons.

Oria  switches are offered in four different colours: Antique, Pearl White, Mustang gray and Anthracite

General Specifications

Optional status indication LEDs

Optional labeling on buttons

Does not require an external power supply

Installation ability to 60×60 mm standard switch junctions

Button configurations with following functions:

  • Switching
  • Dimming
  • Shutter/Blind control
  • Value and priority assignment
  • Scene control

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Rosa Crystal KNX Touch Switches

Rosa Crystal switches are designed for the needs of modern buildings. The new generation of frameless design was designed according to the expectations of the architects. Elegant and trendy touch with glass design in your interior!

Touch sensitivity…

Touch sensitivity switch with one to six equal surfaces, each with its own functions.
Superior touch function!

Glass Surface…

The Rosa Crystal family consists of a 4 mm tampered glass surface covered with conductive material. This allows for a safe operation as well as an elegant appearance.

Frameless minimalist design…

Modern look with 85 x 85mm frameless design

Wide range of colors…

Black and white color options as well as optional RAL cardela colors can be preferred.

Modes…

Away, comfort, night and protection mode options

Customize icon options…

With a glass surface, Rosa offers an unique user experience and intuitive operation with minimalist icon design.
Various icon options make it easy to use.

Independent programmable buttons…

Short – long press options on all buttons.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

RELIABILITY AND SECURITY FOR AUTOMATION by Eelectron

What should you look for in a building automation system? First of all, one that works. So, being able to count on reliable technology is the most important aspect. Let’s find out which one with Claudio Crespi, Eelectron’s Technical Manager.

If I were the customer, I would demand system reliability, as well as security.

The kind of security, for example, that is guaranteed by technology based on Bluetooth Low Energy protocol. Bluetooth Low Energy is a brand new technology featuring intrinsic communication security.

This means that if someone were to listen to a conversation in Bluetooth Low Energy, they would be unable to decipher it unless they had a key to access the system, which would be highly unlikely given that these are systems which belong to the world of banking. Bluetooth Low Energy transmits encrypted messages which prevents what is commonly referred to as “sniffing”, i.e. copying. The security protocol is very high. OTOMO, the network designed to manage energy saving and office control via smartphones and mobile devices, is a system which works with this protocol.

“A wireless system has the same reliability as a wired system”.

What degree of reliability does Bluetooth Low Energy technology have in addition to security?

Very high because it allows networks to be built. It means that communication does not go from one device to another, for example, between telephone and headset, rather it is a technology which connects multiple devices and nodes. Any node can be put in communication with any other network node. It is a technology that works on different frequencies that are close but different, which don’t overlap and create interferences. The devices even have the possibility to choose the freest frequencies. So, not only is it a secure system in that a third party cannot “understand” what two devices that communicate in Bluetooth Low Energy are saying to each other, unless authorised, but it is also reliable because each node has the possibility to enter into communication with all other nodes on the network. If, for any reason, a node were to interrupt the communication, the nearest one to it would take its place.

It would be different if you had a centralised network that depends on just one device. The moment this device fails, the whole network will cease to function.

A Bluetooth Low Energy protocol network, on the other hand, does not require a device that has superior capabilities and coordination over the others.

In the collective imagination, a wireless system is perceived as less secure than a more traditional wired system.

Given that as Eelectron, we are specialists in both wired and wireless systems, we can safely say that a wireless system is no less reliable than a wired system. And there is no guarantee that a wired system is  less likely to malfunction than a wireless one.

Technology today makes it possible to manage “wireless” protocols with devices that make them as reliable as wired systems.

The most popular object in the world is the mobile phone; we surf the Internet with it and it allows us to be constantly connected. The common perception is that this technology is good even if this does not exclude a possible malfunction of the system.

No-one would go back to landline phones today because they do not trust wireless technology.

What are the features which make a system like OTOMO reliable?

The main feature is that OTOMO is based on a Bluetooth Low Energy protocol and, as stated, this technology is more reliable. It works like a mesh network, ensuring data repetition, for example. Therefore, it exploits the ability to propagate messages so that they can reach all points of a system. If one element of the network fails, a mesh network allows alternative message retransmission paths to be verified. Bluetooth Low Energy works at high frequency with a large-signal reflection capacity. If the walls are too thick and the high frequencies cannot pass through them, but the rooms are connected by doors, then the signal will pass through the doors. If I encounter an obstacle and want to get round it, a mesh-type technology allows me to triangulate the signal thanks to other devices which form the network and reach the destination device. Even if there is no perfect radio visibility between the emitting and receiving device.

How much does the fact that OTOMO can be managed from an app on a mobile device affect the perception that it is a reliable system?

Since it is managed by an app, I can immediately check the operating status of the system on my mobile phone. Simply put, if the icon on the mobile device changes, it means that the command was successful even if I do not physically see, for example, if the light has turned on or off in a room that is out of sight.

There is another aspect as well that it particularly important in this period of virus psychosis. It goes beyond the concept of system reliability and falls within the scope of personal safety. No touch has now become a prevention method to protect health. The fact that we are not forced to touch objects, such as switches and handles that have come into contact with who knows how many other people, but can manage everything from a personal device, psychologically increases the perception of safety and is actually safer too.

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

20 Channel Lighting Control Relay by EAE

EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs.

General Specifications


Does not require an external power supply, 20x16A Outputs

Room Control Unit covers all requirements of control in room applications and offers following functions:

  • Light switch
  • AC/DC blind control
  • Fan control
  • Fan Coil Control (2 & 3 point valve)
  • Dry contact inputs

Switching resistive, capacitive and inductive loads in accordance with EN 60669 with following functions:

  • Staircase
  • External logic
  • Priority
  • Threshold
  • Operating hour
  • Sweep

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

16 Channel KNX lighting control relay

EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs.

General Specifications


Does not require an external power supply, 16x16A Outputs

Room Control Unit covers all requirements of control in room applications and offers following functions:

  • Light switch
  • AC/DC blind control
  • Fan control
  • Fan Coil Control (2 & 3 point valve)
  • Dry contact inputs

Switching resistive, capacitive and inductive loads in accordance with EN 60669 with following functions:

  • Staircase
  • External logic
  • Priority
  • Threshold
  • Operating hour
  • Sweep

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

RCU1200 12 Channel KNX Relay

EAE Room Controller Unit is an all-in-one KNX device to control various different room units from a single interface. Room Control Unit provides control of lights, blinds and fan coils as well as optional dry contact inputs.

General Specifications


Does not require an external power supply, 12x16A Outputs

Room Control Unit offers following functions:

  • Light switch
  • AC/DC blind control
  • Fan control
  • Fan Coil Control (2 & 3 point valve)
  • Dry contact inputs

Switching resistive, capacitive and inductive loads in accordance with EN 60669 with following functions:

  • Staircase
  • External logic
  • Priority
  • Threshold
  • Operating hour
  • Sweep

We are proud to have the best building automation products in Pakistan.

Cell: +92-330-8867589

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]