Posted on

“O” light by Artemide

“O” is an essential element that, when switched off, frames nature and suggests perspectives, an unobtrusive object in space that does not alter environmental balances. Its controlled and comfortable light emission can be adjusted with sensors and with the Artemide App to ensure focused operation, thus preventing waste and respecting the circadian cycles of all animal and plant species. 

Introduced in 2018 both floor and suspended outdoor versions, it is a perfect lighting also for indoor use thanks to a cabled option that allows easy relocation. Also in this case the IP degree of protection is still suitable for outdoor use. Its lightness is not just formal: its thin aluminium profile is an element of its own, which can be moved wherever necessary, allowing multiple uses, and creating a pleasant ambiance anywhere with its soft, non-glaring light. “O” is developed in the original 90-cm diameter version, as well as in a smaller, 45-cm and bigger 150-cm versions featuring all the characteristics of the original one. “O” is thus a comprehensive family of elements creating dynamic lightscapes.

For queries please contact below

Cell: +92-331-2887178

Cell: +92-313-8867581

Tel: +92-21-35250460

Email: [email protected]

Posted on

Gople – Suspended decorative led light by Artemide Italy

The basic form of the Gople Lamp enhances the beauty of glass, hand-processed according to an ancient Venetian technique that gradually turns white glass into crystal glass by combining both upon blowing, thus making each piece unique. More innovative finishes are added, including silver or copper vacuum metallization. Silver, bronze, copper and blue finishes are made with an innovative and sustainable metal vacuum deposition process. From the point of view of environmental-friendliness, “sputtering” is the absolutely cleanest coating technology for the type of metal used and because all emissions are abated, in particular those into the atmosphere of sulphuric acid and
cyanides produced by galvanic processes. Solid paint with up to 5% of solvents (compared to 75% of traditional products) is employed for the successive protective clearcoat phase.
The process generates very little waste and the resulting finish is particularly resistant over time. In any of these cases, glass finishing is designed to ensure the best relation with the
emitted light, screening the source and maximizing direct emission through transparency. The most basic version with the traditional E27 or E14 joint is designed to provide
different performance levels compared to the more innovative RWB version, where colours can be combined with each other to create lightscapes that meet space requirements. It is a timeless solution for its flexibility in adjusting to the development of standard source
technologies.

For queries please contact below

Cell: +92-331-2887178

Cell: +92-331-2887178

Tel: +92-21-35250460

Email: [email protected]

Posted on

Eggboard LED Panel by ARTEMIDE

Suspension appliance with sound-absorbing properties ensured by a peculiar sinusoidal cross- section design of the lower surface and the use of a sound-absorbing material. Acoustic efficiency is ensured within a limited space by positioning at approximately one meter above the head of the speaker and listener. Direct emission: a board with a high number of low-voltage LEDs with rotosymmetrical reflectors ensures maximum lighting comfort. Colour temperature 3000K or 4000 K. Complies with the norms on office activities that involve the use of video-terminals (UGR<19)

Direct emission: a board with a high number of low-voltage LEDs ensures maximum lighting comfort. Reflectors can be rotated for use on single or counterposed double desk.

Available in 3 colours (white, grey, green) and 2 different sizes
(1600X800mm – 800X800mm).

For queries please contact below

Tel: +92-21-35250460

Cell: +92-313-8867581

Cell: +92-331-2887178

Email: [email protected]