CCM5P Speaker

CCM5-P comes from ASCENDO as a passive immersive audio monitor. Could be used in wall or surface. The CCM5-P is a true high-performance speaker whose centerpiece is a heavy-duty 13 centimeter large coaxial driver, prevenient from the area of professional PA technology. The genes of this advanced coax driver not only care for an amazingly great acoustic bandwidth, but also provide an efficiency of 88 dB (1 watt/1 meter). The effectiveness of the CCM5-P therefore allows for the combination with lower output power amplifiers. For this reason, the smallest passive speaker from AiA is top recommendation when it comes to the realization of smaller 3D home theaters operating with Dolby Atmos, Auro 3D or DTS:X.

Power rating : 100W

We are proud to have the best German audio products in Pakistan.

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

High Performance D9 Speaker

ASCENDO’s legendary coaxial point source, the quality of craftsmanship and all materials packet in the elegant slim Bauhaus design in classic Bauhaus style distinguish the fascinating D Series loudspeakers.

Extremly accurate mounting in Ansbach, Bavaria Germany. 100% Handwork. Massive steel damping optimized dragon feet. Massive solid steel terminal plates. Highest quality piano lacquer. Only the best components like Finite Elemente damper, Mundorf coils, WBT binding posts, etc.. 6 Chassis 1 Coax One-Point-Source. Tweeter. Midrange 2 Dipol Tweeter 2 High Performance iBass Driver. (W/H/D) 24 / 112,5 / 45 cm

We are proud to have the best German Audio products in Pakistan.

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

Working from Home

Many people are working from home due to the pandemic, lets discuss how KNX can be used to facilitate and safe and healthy environment.

Many people have set up their offices temporarily in spare bedrooms across the world. Working from home has some great benefits, but for most, sadly, it does not include a custom-built office set up specifically for the single purpose of work. Beds have been shifted, wardrobes moved or dismantled or, in many instances, dining room tables have been requisitioned as the workspace. How do we change from work mode to home mode, and can KNX bring anything to the party?

Automation is not necessarily the first words on people’s lips when they setup an office.

Many homes are not that well equipped when it comes to office-quality lighting. For most people, the warm glow of a light bulb in the room almost certainly means that 2700 kelvin yellow, which is great for relaxing in the evening and watching a bit of TV. When it comes to office color temperature on the other hand, there is no ‘perfect’, but people certainly lean more towards the 4000 – 6000 kelvin range.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

ENERGY METER SINGLE PHASE 63A BY EELECTRON

• This Energy-meter provides the essential measurement capabilities required to monitor a single phase electrical installation.

• 0.25-5 (63) A, Class B, 230 VAC 50 Hz, -25 °C … +55 °C, 4 Quadrants, 2 Tariffs.
• Active Energy Class B (according to EN-50470) and Reactive Energy Class 2 (according to IEC 62053-23)
• Direct connected (up to 63 A)
• LCD display and 3 push-button keys (to read Energies, V, I, PF, F, P, Q and to configure some parameters)
• 1 push botton and 1 LED dedicated to KNX.
• Display with 8 digits.
• Self supplied (by the input voltage itself).

Device is intended to be installed on DIN rail.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

EXTERNAL TRANSPONDER READER

The TR22A11KNX from Eelectron is a external card reader is an EIB/KNX device dedicated to access control. This product is for both 2 modules round and squared inwall boxes or for 3 modules boxes, the plexiglass front of the product is available in two different colours. The device has two physical binary inputs available for controlling the door open / close contacts or freely configurable by the user (window contacts, bathroom pull alarms etc.). The device has two relays for lock management, courtesy light control or another use. On the reader front there are 4 LEDs, 3 of which are freely configurable, usually programmed to report about: access granted, access denied, emergency, make up room, room occupied or do not disturb.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

TRANSPONDER READER KNX

The Transponder Reader TR32Ax9KNX is 2 IN / 2 OUT + BELL and a KNX wall mounting device suitable to access control application.
This device can be used in any kind of building (Hotel, Hospital, Offices, Parking, etc..) where the access control application is required.
The device is equipped with two binary inputs (potential free contacts) that can be used, for instance, to control whether the door lock has been opened or closed or other signals coming from external switches/contacts (i.e. windows, bathroom emergency alarms, etc..) and with one frontal switch freely configurable by ETS. The transponder reader is equipped also with two output relays which can be used for any purposes, typically to open the door or turning on the courtesy light inside the room.
The product provides on the front side four LEDs in order to enlighten 4 icons to display the following states (e.g. in case of Hotel management):
– Access Allowed/Not Allowed
– SOS request
– Service Call (clean room, etc..)
– Client status (“Busy room” or “Do not Disturb”)
The LEDs and icons can be configured in association with other alarms or events. The transponder reader can reads cards or keys at a maximum distance of 30mm from the front side.
The access control follows a sequence where the “build number” has been checked at first, then the “data” to check if it has been elapsed or not, next the password ID for client/ guest/service identification, then the enabled entrance timing window. In case card reading pass all checks the door is opened and, if set, the courtesy light inside is switched on. At the same time the Transponder Holder can send the reading response to the bus.
The device configuration for commissioning in terms of physical address, group addresses and parameters is done with ETS ( Engineering Tool Software) through a download of the Application Program.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

VIRTUAL BADGE – HORIZONE WEBSERVER by Eelectron

Virtual Badge is an innovative access control system, which allows the opening of door locks with your smartphone, without the need for keys or badge readers physically installed in front of each door.
The management of permission of the users, and the sending of virtual access keys, is entirely manageable via app, both locally and remotely, and is therefore ideal also for unattended structures.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

INWALL 3 IN / 2 OUT MODULE

IO32D01KNX module includes: • 2 digital inputs • 1 analog input • 2 relay output (bistable) Digital inputs are intended to be connected to free potential contacts and can interface sensors, traditional buttons, etc; they can be used to on/off commands, dimming, shutter control, scene recall and control, sequences of 3 objects. Analog input, can manage one temperature probe (with On/Off threshold) or one thermostats to control heating and cooling equipments, valves, 2 and 4 pipes fan coils; etc.. Analog input, alternatively to the temperature sensor, can manage a Infrared Receiver (IRX) in order to forward to the bus up to 8 channel coming from a Infrared Remote Control (IRC) with on/off commands, scenes, sequences of 2 objects, dimmer and shutter. Outputs include switching function with timed delays, staircase function, scene recall, lock or logic function. • Each output can be configured independently for load control (2 independent channels) Device 2 outputs on board can be configured: • Each output can be configured independently for ON / OFF or continuous switching (PWM) for Electric valves (solenoid actuators) (2 independent channels) • Outputs can be configured in pairs for the management of roller shutters and blinds; (1 channel) The device is equipped with KNX communication interface.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

ANALOG / DIGITAL MODULE 8 IN / 4 LED OUT

AD84C01KNX module includes 4 digital inputs to interface dry potential contacts and 4 analog or digital inputs for dry contacts or temperature sensors and 4 led outputs. Digital inputs can interface sensors, traditional buttons, etc; 4  low voltage/current outputs can drive LED for synoptics panels or switches. Inputs 5 ÷ 8, set as analog inputs, can enable up to 4 temperature probes (with On/Off threshold) and 4 thermostats to control heating and cooling equipments, valves, 2 and 4 pipes fan coils; etc.. The device is equipped with appropriate communication interface with the bus type TP1 (twisted pair) KNX European standard, according CEI EN 50090.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]

9025 – CAPACITIVE KNX THERMOSTAT

9025 thermostat – a KNX® room temperature controller that includes 7 configurable capacitive buttons for on / off, dimming, rolling shutters and venetian controls, scene recall and control, object sequences, local thermostat controls, etc. Device offers a 2 stage thermostat with integrated PI controller to control heating and cooling equipment, valves, 2 and 4 pipes fan coils etc ..Device has an embedded temperature sensor and a rear 2 poles connector, configurable as digital or analog input; It’s possible to connect an additional NTC temperature probe (Eelectron codes TS01A01ACC or TS01B01ACC – not included) to perform a direct temperature measurement. A version with integrated temperature and relative humidity sensor is available usable for controlling actuators for ambient humidity control.9025 range has a RGB led bar on the front side in order to visualize thermostat operating modes or feedbacks and other values available over the KNX bus. The device includes an RGB led bar on the front to display status or other values available on the KNX bus. Glass covers are available for HOTEL or RESIDENTIAL applications; both covers can be in CUSTOM version. Using glasses in CUSTOM version is possible to light up custom and interchangeable icons matching with the associated function. The 9025 KNX® range is mounted in 2 or 3 modules box and is compliant with main standards (British, German, Italian, etc). Device is equipped with KNX communication interface.

We are proud to have the best smart home and building automation products in Pakistan.

Tel: +92-21-35250460

Cell: +92-330-6322277

Cell: +92-331-2887178

Email: [email protected]